VF-102G-KIT: Kit de vídeo de 1 canal sobre fibra óptica conector FC
VF-102G-KIT
Canales de vídeo: 1 canal bidireccional.
Conectores de vídeo: BNC.
Vídeo soportado: 1080p AHD/TVI/CVI - 480p CVBS.
Conector de fibra: FC.
Tipo de fibra: Monomodo.
CARACTERÍSTICAS TÉCNICAS
Video Characteristics | |
---|---|
Video Channel | 4-channel bi-direction |
Video Connector | BNC |
Supported Video Type | 1080p: AHD/TVI/CVI 480p: CVBS |
Video Input/Output Impedance | 75ohm/unbalanced interface |
Video Input/Output Voltage | 1.0 Vpp / typical peak-to-peak value |
Video Bandwidth | 25 to 60MHz |
Video Digital Bit Width | 8/10 bit |
Differential Gain (DG) | < 2% (typical value) |
Differential Phase (DP) | < 2° (typical value) |
SNR-weighted Scheme | > 67dB (typical value) |
Data Interface | |
Data Channel | 4 channels |
Physical Protocol | RS485 |
Operation Mode | Simplex |
Data Connector | 4 Pin terminal block with screw clamps |
Data Rate | DC-150Kbps |
Data Distance | RS485: 0-20km |
BPS | 0-115.2Kbps |
Bit Error Rate (BER) | < 10-9 |
Optical Interface | |
Optical Connector | FC |
Fiber Type | Single-mode, single fiber |
Distance | 20km for single mode |
Optical Wavelength | VF-402-T TX: 1310nm RX: 1550nm VF-402-R TX: 1550nm RX: 1310nm |
Transmitter Coupled Power | Max.: 0dBm Min.: -8dBm |
Receive Sensitivity | -22dBm |
Link Budget | From 15dB to 20dB at 1310nm or 1550nm |
Cable | 9/125μm single-mode cable |
Hardware Specifications | |
LED Indicators |
|
Dimensions (W x D x H) | 157 × 116.5 × 48 mm |
Weight | 580g |
Power Requirement | 5V DC, 2A |
Chassis Current Consumption | 1.10 amp for 4-channel video and 1-channel data |
Mechanical | Metal |
Standards Conformance | |
Regulatory Compliance | FCC, CE |
Environment | |
Operating | Temperature: -20 ~ 70 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 85 degrees C Relative Humidity: 0 ~ 95% (non-condensing) |
Standard Accessories | |
Packet Contents | VF-402-T x 1 VF-402-R x 1 User’s manual x 1 5V/2A power adapter x 2 |