IGS-6325-4UP2X: 4 puertos 2.5GBASE-T Ultra PoE, 2 puertos SFP 10G. ERPS

IGS-6325-4UP2X

Gestionabilidad:  Capa 3.

Puertos de cobre: 4 puertos 2.5GBASE-T 

Puertos de fibra: 2 puertos 10G SFP. 

Alimentación PoE: Sí, Ultra PoE.

ERPS: Sí. 

Temperatura de trabajo: -40°C hasta 75°C.

CARACTERÍSTICAS TÉCNICAS

Especificaciones técnicas
Hardware Specifications
Copper Ports4 2.5GBASE-T RJ45 auto negotiation port
Supports 2.5G/1G/100/10Mbps data rate
SFP+ Ports2 10GBASE-SR/LR SFP+ slots
Backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceivers
PoE Injector Ports4 ports with 802.3bt PoE++ injector function, from Port-1 to Port-4
Console1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
ConnectorRemovable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 3/4 for Alarm, Pin 5/6 for Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND
AlarmOne relay output for power failure. Alarm relay current carry ability: 1A @ 24VDC
Digital Input (DI)2 digital inputs:
 Level 0: -24~2.1V (±0.1V)
 Level 1: 2.1~24V (±0.1V)
 Input load to 24VDC, 10mA max.
Digital Output (DO)2 digital outputs:
 Open collector to 24VDC, 100mA
EnclosureIP30 aluminum case
InstallationDIN-rail or wall-mount
SDRAM512Mbytes
Flash Memory64Mbytes
Dimensions (W x D x H)76 x 135 x 152 mm
Weight1,319g
Power RequirementsDC 48V-54V, 8.3A max.
Power Consumption48VDC Input:
Max. 8.9 watts/30.4 BTU (Idle)
Max. 379 watts/1293.2 BTU (Full load)

54VDC Input:
Max. 9.2 watts/31.4 BTU (Idle)
Max. 381 watts/1300 BTU (Full load)
ESD ProtectionContact 4KVDC; Air 8KVDC
Surge Protection2KVDC
LED IndicatorsSystem:
 Power 1 (Green), Power 2 (Green)
 Alarm (Red)
 Ring (Green), Ring Owner (Green)
 DI/DO (Red)
PoE Usage:
 120W/240W/360W (Amber)
Per 10/100/1G/2.5GBASE-T RJ45 Port:
 Data LED:
  1G/2.5G LNK/ACT (Green)
  10/100 LNK/ACT (Amber)
PoE LED:
  IEEE 802.3bt Mode (Green)
  IEEE 802.3at Mode (Amber)
Per 1G/2.5G/10GBASE-X SFP+ Port:
 1G/2.5Gbps LNK/ACT (Green)
 10Gbps LNK/ACT (Amber)
Switching Specifications
Switch ArchitectureStore-and-Forward
Switch Fabric60Gbps/non-blocking
Throughput44.462Mpps@64Bytes
Address Table8K entries, automatic source address learning and aging
Shared Data Buffer32Mbits
Jumbo Frame10K bytes
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Power over Ethernet
PoE StandardIEEE 802.3bt PoE++ Type-4
PoE Power Supply TypeEnd-span
Mid-span
BT
Power Pin Assignment802.3bt/UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
802.3at/PoE: End-span: 1/2(-), 3/6(+)
802.3at/PoE: Mid-span: 4/5(+), 7/8(-)
PoE Power OutputPer port 48V ~ 54VDC
-802.3bt Type-4 mode: maximum 95 watts
-End-span mode: maximum 36 watts
-Mid-span mode: maximum 36 watts
-Force mode: maximum 95 watts
PoE Power BudgetSingle power input: 240W maximum (depending on power input)
Dual power input: 360W maximum (depending on power input)
※Dual power input must be the same as DC voltage, like dual 54V.
Number of 90W 802.3bt Type-4 PDs4
Number of 60W 802.3bt Type-3 PDs4
Number of 30W 802.3at Type-2 PDs4
PoE Management Functions
Enhanced PoE ModeStandard/Legacy/Force
PoE ManagementPD Alive Check
Scheduled Power Recycling
PoE Schedule
PoE Usage Monitoring
PoE Extension
Active PoE Device Live DetectionYes
PoE Power RecyclingYes, daily or predefined schedule
PoE Schedule4 schedule profiles
PoE Extend ModeYes, max. up to 160 meters
Layer 3 Functions
IP InterfacesMax. 32 VLAN interfaces
Routing TableMax. 32 static routing entries
Max. 1K routing table entries
Routing ProtocolsIPv4 RIPv2
IPv4 OSPFv2
IPv6 OSPFv3
IPv4 hardware static routing
IPv6 hardware static routing
Layer 2 Functions
Port ConfigurationPort disable/enable
Auto-negotiation 10/100/1000/2500Mbps full and half duplex mode selection
Flow control disable/enable
Port link capability control
Port StatusDisplay of each port’s speed duplex mode, link status, flow control status, auto-negotiation status and trunk status
Port MirroringTX/RX/Both
Many-to-1 monitor
RMirror – Remote Switched Port Analyzer (Cisco RSPAN)
Supports up to 5 sessions
VLANIEEE 802.1Q tagged VLAN
IEEE 802.1ad Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
IP Subnet-based VLAN
MVR (Multicast VLAN registration)
GVRP
Up to 4K VLAN groups, out of 4095 VLAN IDs
Link AggregationIEEE 802.3ad LACP/static trunk
Max. 3 trunk groups with max. 6 ports per trunk group
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
Supports 7 MSTP instances
BPDU Guard, BPDU filtering and BPDU transparent
Root Guard
IGMP SnoopingIPv4 IGMP (v1/v2/v3) snooping
IPv4 IGMP querier mode support
Supports 255 IGMP groups
MLD SnoopingIPv6 MLD (v1/v2) snooping,
IPv6 MLD querier mode support
Supports 255 MLD groups
Bandwidth ControlPer port bandwidth control
 Ingress: 10Kbps~13128Mbps
 Egress: 10Kbps~13128Mbps
RingSupports ERPS, and complies with ITU-T G.8032
Recovery time < 10ms @ 3 nodes
Recovery time < 50ms @ 16 nodes
Supports Major ring and sub-ring
SynchronizationIEEE 1588v2 PTP (Precision Time Protocol)
 Peer-to-peer transparent clock
 End-to-end transparent clock
QoSTraffic classification based, strict priority and WRR
8-level priority for switching:
 Port number
 802.1p priority
 802.1Q VLAN tag
 DSCP/ToS field in IP packet
Security Functions
Access Control ListIP-based ACL/MAC-based ACL
ACL based on:
 MAC Address
 IP Address
 Ethertype
 Protocol Type
 VLAN ID
 DSCP
 802.1p Priority
Up to 512 entries
SecurityPort security
IP source guard, up to 512 entries
Dynamic ARP inspection, up to 1K entries
Command line authority control based on user level
Static MAC address, up to 64 entries
AAARADIUS client
TACACS+ client
Network Access ControlIEEE 802.1x port-based network access control
MAC-based authentication
Local/RADIUS authentication
Management
Basic Management InterfacesConsole; Telnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSHv2, TLS v1.2, SNMPv3
System ManagementFirmware upgrade by HTTP protocol through Ethernet network
Configuration upload/download through HTTP
Remote Syslog
System log
LLDP protocol
NTP
PLANET Smart Discovery Utility
PLANET CloudViewer app
SNMP MIBsRFC 1213 MIB-II
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Group 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 4292 IP Forward MIB
RFC 4293 IP MIB
RFC 4836 MAU-MIB
IEEE 802.1X PAE
LLDP
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A
CE:
 EN55032
 EN55035
Stability TestingIEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards ComplianceIEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3ae 10GBASE-X
IEEE 802.3bz 2.5/5GBASE-T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3ah OAM
IEEE 802.1ag Connectivity Fault Management (CFM)
RFC 768 UDP
RFC 783 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
RFC 2328 OSPF v2
RFC 5340 OSPF v3
RFC 2453 RIP v2
ITU-T G.8032 ERPS Ring
Environment
Operating-40 ~ 75 degrees C
Storage-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)
Alimentación PoE
Ultra PoE
Puertos RJ45
Hasta 4 Puertos
Puertos SFP
Hasta 2 Puertos
Velocidad de red
Gigabit Ethernet

Esta página web utiliza cookies propias y de terceros para que podamos mejorar tu experiencia en nuestro sitio. Más información y cómo eliminarlas.