FGSW-1816HPS: 16 Puertos Fast Ethernet PoE+ y 2 Puertos TP/SFP

Physical Port

• 16 10/100BASE-TX RJ45 copper ports with IEEE 802.3at/af PoE+ injector function
• 2 10/100/1000BASE-T Gigabit RJ45 copper ports
• 2 1000BASE-X mini-GBIC/SFP slots, shared with port-17 to port-18
• Reset button for system factory default

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
• Automatic address learning and address aging
• Supports CSMA/CD protocol

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus
• Complies with IEEE 802.3af Power over Ethernet
• Up to 16 ports of IEEE 802.3af/802.3at devices powered
• Supports PoE Power up to 36 watts for each PoE port
• 220-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
• PoE Management
- Per port PoE function enable/disable

- Per Port PoE operation mode selection

- Per PoE port power budget control

- PD classification detection and  PoE consumption usage status

• Intelligent PoE features
- Real-time display of PoE chipset temperature

- PD alive check

- PoE port sequence

- PoE schedule

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
- Port-based VLAN, up to 18 VLAN groups

- IEEE 802.1Q tagged VLAN

- Protocol VLAN

- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

- GVRP

- Voice VLAN

• Supports Spanning Tree Protocol
- STP (IEEE 802.1D Spanning Tree Protocol)

- RSTP (IEEE 802.1w Rapid Spanning Tree Protocol)

- MSTP (IEEE 802.1s Multiple Spanning Tree Protocol)

- STP BPDU filtering, BPDU Guard

• Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)

- 1 LACP group, up to 2 ports per LACP group 

- Cisco ether-channel (static trunk)

- 1  trunk group, up to 2 ports per trunk group

• Provides port mirror (many-to-1)
• Loop detection

Quality of Service

• Ingress/Egress Rate Limit per port bandwidth control
• Storm Control support
- Broadcast/ Multicast /DLF (Destination Lookup Fail)/ARP/ICMP
• Traffic classification
- IEEE 802.1p Qos/CoS

- TCP/UDP/DSCP/IP precedence of IPv4/IPv6 packets

• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IPv4 IGMP snooping v1/ v2 and v3
• Supports IPv6 MLD snooping v1, v2

Security

• Access Control List
- IPv4/IPv6 IP-based ACL

- MAC-based ACL

• Port-MAC-IP Address Binding
- Port-MAC-IP Port Setting

- Port-MAC-IP Entry Setting

• MAC Address Binding
- Static MAC

- MAC Filtering

• DHCP snooping to filter distrusted DHCP messages
• ARP Inspection discards ARP packets with invalid MAC address to IP address binding

Management

• IPv4 and IPv6 dual stack management
• Switch management interface
- Web switch management 

- Telnet command line interface

- SNMP v1, v2c and v3

• BOOTP and DHCP for IP address assignment
• System maintenance
- Firmware upgrade via HTTP

- Configuration upload/download through web interface

- Hardware-based reset button for system reset to factory default

• SNTP Network Time Protocol
• Link Layer Discovery Protocol (LLDP)
• Event message logging to remote Syslog server
• PLANET Smart Discovery utility