HPOE-1200G: 12 Puertos Gigabit PoE+

Referencia HPOE-1200G

Puerto cobre: 24 puertos 10/100/1000

Potencia máxima acumulada: 360W

Descripción

CARACTERÍSTICAS TÉCNICAS

Características

Interface

Complies with the IEEE 802.3, IEEE 802.3u and IEEE 802.3ab Ethernet standards
24-port RJ45

Data input

”- 12-port 10/100/1000Mbps “

Data + Power output

One 10/100/1000BASE-T management port

Power over Ethernet

Complies with IEEE 802.3at and IEEE 802.3af Power over Ethernet mid-span PSE
Up to 12 IEEE 802.3at/802.3af devices powered
360-watt PoE budget
Supports PoE power up to 30.8 watts (802.3at PoE)/15.4 watts (802.3af PoE) for each PoE port
Automatically detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m

PoE Management

Total PoE power budget control
Per port PoE power schedule
PoE function enable/disable
Per port PoE function enable/disable
PoE port power feeding priority
PD classification detection
Over temperature protection
PD alive-check

Management

Web interface for remote management
Supports Network Time Protocol (NTP)
Firmware upgrade through Web interface
PLANET Smart Discovery utility automatically finds PLANET devices on the network
SNMP trap for alarm notification of events
System log/remote syslog

Hardware

19-inch rack mountable; 1U height
Reset button for resetting to default setting and system reboot
LED indicators for PoE ready and PoE activity
LED indicators for power alert and fan alert
FCC Part 15 Class A, CE

Especificaciones técnicas

Hardware
Hardware Version	4
Interface	Data Input Ports: 12 x RJ45 Data + Power Output Ports: 12 x RJ45 Management Port: 1 x RJ45 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX
Data Rate	10/100/1000Mbps
LED	System: SYS PWR x 1 (Green) PoE Failure x 1 (Red) Fan Failure x 1 (Red) Per PoE Port: PoE-in-use x 1 (Green) Management port x 2: 1000 (Green), 10/100(Orange)
Network Cable	10BASE-T: 4-pair UTP Cat5 up to 100m (328ft) 100BASE-TX: 4-pair UTP Cat5 up to 100m (328ft) 1000BASE-T: 4-pair UTP Cat5e/6 up to 100m (328ft) EIA/TIA- 568 100-ohm STP (100m)
Power Requirements	100-240V AC, 50/60 Hz, 6A
Power Consumption	440 watts (max.)
Ventilation	Fan x 3
Dimensions (W x D x H)	440 x 300 x 44mm
Power over Ethernet
PoE Power Supply Type	Mid-span
PoE Power Output	Per port DC 52V 30.8/15.4 watts
Power Pin Assignment	4/5(-), 7/8(+)
PoE Power Budget	360 watts
Number of 802.3af PDs (Class 0, 1, 2, 3) can be powered	12
Number of 802.3at PDs (Class 1, 2, 3) can be powered	12
Number of 802.3at PDs (Class 0, 4) can be powered	12
Management
Management Interface	Web, PLANET Smart Discovery Lite
PoE Management	Power limit by consumption and classification PoE admin mode Per port power schedule Per port power enable/disable Power feeding priority Over temperature protection Current per port usage and status Total power consumption
Management Feature	Setup of system/management functions Web firmware upgrade SNMP trap for alarm notification of events
Standards Conformance
Regulatory Compliance	FCC Part 15 Class A, CE
Standards Compliance	IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet RFC 768: UDP RFC 791: IP RFC 2068 HTTP RFC 1157: SNMP v1 RFC 1902: SNMP v2c RFC 5424: Syslog
Environments
Operating	Temperature: 0 ~ 50 degrees C Relative Humidity: 5 ~ 90% (non-condensing)
Storage	Temperature: -10 ~ 70 degrees C Relative Humidity: 5 ~ 90% (non-condensing)