LRP-101CE: Extensor PoE sobre cable coaxial

LRP-101CE

<p>Conversor de medio IP industrial IP30 (-40 a 75ºC) con un puerto de cobre Fast Ethernet 10/100Base-TX sobre un cable coaxial mediante conector BNC para aplicaciones de CCTV a gran distancia. Transmite la alimentación PoE bajo el estándar IEEE 802.3af (15.4W) e IEEE802.3at (30W) a través del cable coaxial.</p>

CARACTERÍSTICAS TÉCNICAS

Especificaciones técnicas
Hardware Specifications
Ethernet Interface■ Copper:
• 10/100BASE-TX RJ45
• auto-negotiation/ auto-MDI/MDI-X

■ Power over Ethernet Standard:
IEEE 802.3at/af PoE PSE (Power Source Equipment)

■ PoE Output: 56V DC, 600mA max.

■ PoE Budget: Up to 25 watts

■ PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-)

■ Data Rate: 100/100Mbps

■ Cabling: Cat5e or above

■ Maximum Distance: 100 meters

■ Maximum Frame Size: 1522bytes
Long Reach PoE Interface■ Connectivity:
• 1 x BNC female
• Long Reach PoE over coaxial PD (Powered Device)

■ Power Input: 37~56V DC*

■ Power Pin Assignment:
• BNC center pole : DC+ / Hi
• BNC shield : DC - / Lo

■ Cabling:
• Coaxial cable: 75 ohm
• RG-6/U cable, less than 12Ω/1,000ft.
• RG-59/U cable, less than 30Ω/1,000ft.

■ Maximum Distance:
• Max. 200m with PoE+ output (656ft.)
• Max. 600m with PoE output (1,968ft.)
• Max. 1,200m without PoE output (3,937ft.)

■ Long Reach Ethernet Standard: IEEE 1901

■ Modulation Type: Wavelet-OFDM

■ Security: 128-bit AES encryption

■ Frequency Band: 2 ~ 28 MHz

■ Encryption: AES 128-bit

■ Performance**
Distance
Data Rate*
(Upload / Download)
LRP-101CE 802.3af/at PoE Output Capability**
LRP-101CH
with 56V DC in
LRP-101CH
with 30W PoE+ in
200m
93 / 93Mbps
29W
16W
400m
93 / 93Mbps
22W
14W
600m
87 / 91Mbps
13W
10W
800m
75 / 83Mbps
10W
8W
1000m
55 / 73Mbps
8W
7W


■ Multiple Nodes: Supports up to 4 LRP extenders within 1km

■ LRP Compatibility:
With power over coaxial input
• LRP-101CH – 1-Port LRP Injector
• LRP-822CS – 8-Port LRP over Coax Switch
• LRP-1622CS – 16-Port LRP over Coax Switch
LED Indicators4 x LEDs
■ PWR
■ LRP LNK
■ PoE-in-use
■ LNK/ACT
ESD Protection4KV DC
EnclosureMetal case
InstallationWall mount or DIN rail with optional kit
Dimensions (W x D x H)94 x 70 x 26 mm
Weight375g
Power RequirementsBNC Power over Coaxial Input: 44~56V DC
Standards Conformance
Standards ComplianceIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
Regulation ComplianceFCC Part 15 Class A, CE
Environment
TemperatureOperating: -20~70 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~95% (Non-condensing)
Storage: 5~95% (Non-condensing)

Esta página web utiliza cookies propias y de terceros para que podamos mejorar tu experiencia en nuestro sitio. Más información y cómo eliminarlas.