LRP-101C-KIT: Extensor PoE+ sobre cable coaxial

LRP-101C-KIT

Conversor de medio IP industrial IP30 (-40 a 75ºC) con un puerto de cobre RJ-45. Pareja (Inyector LRP-101CH y Extensor LRP-101CE) de conversores de medio con un puerto de cobre RJ-45 Fast Ethernet 10/100Base-TX sobre un cable coaxial mediante conector BNC para aplicaciones de CCTV a gran distancia. Transmite la alimentación PoE bajo el estándar IEEE 802.3af (15.4W) e IEEE802.3at (30W) a través del cable coaxial.

LRP-101C-KIT - Conversor industrial de coaxial a UTP

Power over Ethernet

  • Eliminates power cabling with PoE over coaxial
  • Supports Power over Ethernet PSE (PoE Injector)
  • Power and Ethernet data transmission of 1,000m over coaxial cabling
  • Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet PD on RJ45 port
  • Supports Long Reach PoE power up to 30.8 watts (depending on power source and cable distance)
  • Supports PoE Power up to 25 watts (depending on power source and cable distance)
  • Auto detects remote powered device (PD)
  • Plug and Play; no PC required


Industrial Case and Installation

  • Supports extensive LED indicators for network diagnostics
  • Metal case protection
  • Compact size, DIN-rail and wall-mount design
  • Supports EFT surge protection of 2kV DC for power line
  • Supports Ethernet ESD protection of 4KV DC
  • -20 to 70 degrees C operating temperature

Especificaciones técnicas

Hardware Specifications

Ethernet InterfaceLRP-101CH
■ Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X
■ Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device)
■ PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC 
■ Data Rate: 100/100Mbps
■ Cabling: Cat5e or above
■ Maximum Distance: 100 meters
■ Maximum Frame Size: 1522 bytes

LRP-101CE
■ Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X
■ Power over Ethernet Standard: IEEE 802.3at/af PoE PSE 
　(Power Source Equipment)
■ PoE Output: 56V DC, 600mA max.
■ PoE Budget: Up to 25 watts
■ PoE Mode: End-span, RJ45 Pin 1/2(+), 3/6(-)
■ Data Rate: 100/100Mbps
■ Cabling: Cat5e or above
■ Maximum Distance: 100 meters
■ Maximum Frame Size: 1522 bytes
Long Reach PoE InterfaceLRP-101CH
■ Connectivity: 1 x BNC female connector Long Reach PoE over coaxial PSE
　(Power Source Equipment)
■ Power Output: 41~56V DC
■ Power Pin Assignment: 
　BNC center pole: DC+
BNC shield: DC-
■ Cabling: 
　Coaxial cable: 75 ohm
　RG-6/U cable, less than 12Ω/1,000ft.
　RG-59/U cable, less than 30Ω/1,000ft.
■ Maximum Distance: 
　Max. 200m with PoE+ output (656ft.)
　Max. 600m with PoE output (1,968ft.)
　Max. 1200m without PoE output (3,937ft.)
■ Long Reach Ethernet Standard: IEEE 1901
■ Modulation Type: Wavelet-OFDM 
■ Security: 128-bit AES encryption
■ Frequency Band: 2 ~ 28 MHz
■ Encryption: AES 128-bit
■ LRP Compatibility: LRP-101CE, 1-Port LRP Extender

LRP-101CE
■ Connectivity: 1 x BNC female Long Reach PoE over coaxial PD 
　(Powered Device)
■ Power Input: 37~56V DC
■ Power Pin Assignment: 
　BNC center pole: DC+
　BNC shield: DC-
■ Cabling: 
　Coaxial cable: 75 ohm
　RG-6/U cable, less than 12Ω/1,000ft.
　RG-59/U cable, less than 30Ω/1,000ft.
■ Maximum Distance:
　Max. 200m with PoE+ output (656ft.)
　Max. 600m with PoE output (1,968ft.)
　Max. 1200m without PoE output (3,937ft.)
■ Long Reach Ethernet Standard: IEEE 1901
■ Modulation Type: Wavelet-OFDM 
■ Security: 128-bit AES encryption
■ Frequency Band: 2 ~ 28 MHz
■ Encryption: AES 128-bit
■ LRP Compatibility: With power over coaxial input
　LRP-101CH, 1-Port LRP Injector
　LRP-822CS, 8-Port LRP over Coax Switch
　LRP-1622CS, 16-Port LRP over Coax Switch

Performance**
Distance
Data Rate*
(Upload / Download)
LRP-101CE 802.3af/at PoE Output Capability**
LRP-101CH
with 56V DC in
LRP-101CH
with 30W PoE+ in
200m
93 / 93Mbps
29W
16W
400m
93 / 93Mbps
22W
14W
600m
87 / 91Mbps
13W
10W
800m
75 / 83Mbps
10W
8W
1000m
55 / 73Mbps
8W
7W
LED IndicatorsLRP-101CH
4 x LEDs
■ PWR
■ LRP LNK
■ PoE IN
■ LNK/ACT

LRP-101CE
4 x LEDs
■ PWR
■ LRP LNK
■ PoE-in-use
■ LNK/ACT
ESD Protection4KV DC
EFT ProtectionLRP-101CH
■ 2KV

LRP-101CE
■ -
EnclosureMetal case
InstallationWall mount or DIN rail with optional kit
Dimensions (W x D x H)94 x 70 x 26 mm
WeightLRP-101CH
■ 200g

LRP-101CE
■ 375g
Power RequirementsLRP-101CH
■ RJ45 PoE Input: 802.3at/af 48~56V DC
■ DC Input: 48~56V DC

LRP-101CE
■ BNC Power over Coaxial Input: 44~56V DC


Standards Conformance

Standards ComplianceIEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af Power over Ethernet (802.3at Type 1)
IEEE 802.3at Power over Ethernet (802.3at Type 2)
Regulation ComplianceFCC Part 15 Class A, CE


Environment

TemperatureOperating: -20~70 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~95% (non-condensing)
Storage: 5~95% (non-condensing)


Note

Note*1.Upload: LRP-101CE to LRP-101CH,data stream.
　Download: LRP-101CH to LRP-101CE,data stream.
2.As there are various resistance values in the category of RG-59/U or 
　RG-6/U cable,the actual data rate will vary on the quality of the copper 
　wire and environment factors.
**Depending on what the DC/PoE Power Input and the length of coaxial 
　cable are.

Los clientes que adquirieron este producto también compraron:

2
Disponible
Conversores sobre cable coaxial

LRP-101CE: Extensor PoE sobre cable coaxial

LRP-101CE
219,45 €
<p>Conversor de medio IP industrial IP30 (-40 a 75ºC) con un puerto de cobre Fast Ethernet 10/100Base-TX sobre un cable coaxial mediante conector BNC para aplicaciones de CCTV a gran distancia. Transmite la alimentación PoE bajo el estándar IEEE 802.3af (15.4W) e IEEE802.3at (30W) a través del cable coaxial.</p>
View

Esta página web utiliza cookies propias y de terceros para que podamos mejorar tu experiencia en nuestro sitio. Más información y cómo eliminarlas.