IPOE-E174: 1 Puerto Gigabit Ultra PoE + 4 Puertos Gigabit (Datos+PoE)

Referencia IPOE-E174

5 Puertos 10/100/1000 Base-T RJ45

Entrada: 1 Puerto 10/100/1000 Ultra PoE alimentación (Datos + PoE IEEE 802.3bt PoE++)
Salida: 4 Puerto 10/100/1000 Datos + PoE (IEEE 802at 25W)

Potencia máxima acumulada:

75 W (max.) @ 802.3bt PoE++ Type 4 input
60 W (max.) @ 802.3bt PoE++ Type 3 input
75 W (max.) @ PoH input
25 W (max.) @ 802.3at PoE+ input

Rango de temperatura: -40C - 75C

Descripción

CARACTERÍSTICAS TÉCNICAS

Características

Physical Port

Five 10/100/1000BASE-T Gigabit RJ45 interfaces

data + power input

data + power output

Power over Ethernet

1-port data + power input
4-port data + power output
Extends the range of PoE to an additional 100 meters (328ft.)
Forwards both Ethernet data and PoE power to remote device

Layer 2 Features

Features Store-and-Forward mode with wire-speed filtering and forwarding rates
Integrates address look-up engine, supporting 2K absolute MAC addresses
9K jumbo frame support in 1000Mbps duplex mode
Automatic address learning and address aging

Industrial Case and Installation

IP30 metal case
DIN rail and wall-mount design
Supports 6000V DC Ethernet ESD protection
-40 to 75 degrees C operating temperature
No external power cable required for installation
Plug and Play installation

Especificaciones técnicas

Hardware Specifications
Hardware Version	2
Network Connector	PoE In Port 　1 x 10/100/1000BASE-T Ethernet with ultra PoE “Data + DC” in, auto 　MDI/MDI-X, auto-negotiation RJ45 connector PoE Out Port 　4 x 10/100/1000BASE-T Ethernet with IEEE 802.3af/at PoE “Data + DC” 　out, auto MDI/MDI-X, auto-negotiation RJ45 connector
Switch Architecture	Store-and-Forward switch architecture
MAC Address Table	2K MAC address table with auto learning function
Switch Fabric	10Gbps
Switch Throughput	7.44Mpps @ 64Bytes
Flow Control	IEEE 802.3x pause frame for full duplex Back pressure for half duplex
Jumbo Frame	9Kbytes
ESD Protection	6KV DC
Enclosure	IP30 metal case
Installation	DIN rail kit and wall-mount ear
Cable	Twisted-pair cable : 　■ 10BASE-T: 2-pair UTP Cat. 3, 4, 5 up to 100 meters 　■ 100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters 　■ 1000BASE-T: 4-pair UTP Cat. 5e, 6 up to 100 meters
Dimensions (W x D x H)	32 x 85 x 135 mm
Weignt	424g
Power Consumption	4.1 watts/13.9 BTU (Power On) 64.7 watts/220.6 BTU (Full PoE loading without data transfers) 66.1 watts/225.4 BTU (Full loading with PoE function)
LED Display	System: PWR (Green) Power Input: 30W, 2-pair 802.3at PoE in (Green) Power Input: 60W+, 4-pair 802.3bt, Ultra PoE or UPOE in (Green) PoE Power Usage: 20W, 40W and 60W PoE Input Port: LNK/ACT (Green) PoE Input Port: PoE in (Orange) Per PoE Output Port: LNK/ACT (Green) Per PoE Output Port: PoE-in-Use (Orange)
Power over Ethernet
PoE Standard	PoE In Port 　IEEE 802.3at High Power over Ethernet end-span/mid-span class 4 PD Per PoE Out Port 　IEEE 802.3at High Power over Ethernet end-span PSE 　IEEE 802.3af Power over Ethernet end-span PSE
PoE Power	PoE In Port 　50~57V DC, max. 72 watts Per PoE Out Port 　44~55V DC, max. 30.8 watts
Power Pin Assignment	PoE In Port 　1/2(+), 3/6(-); 4/5(+), 7/8(-) Per PoE Out Port 　1/2(+), 3/6(-)
Compatible PoE Injectors	POE-171A-60 POE-171A-95 IPOE-171-60 IPOE-171-95
PoE Power Budget	64 watts (max.) @ PoE Type 3 input (Ultra PoE input) 30 watts (max.) @ PoE Type 2 input (802.3at input) 15 watts (max.) @ PoE Type 1 input (802.3af input)
Standards Conformance
Regulation Compliance	FCC Part 15 Class A, CE
Stability Testing	IEC 60068-2-32 (Free fall) IEC 60068-2-27 (Shock) IEC 60068-2-6 (Vibration)
Standards Compliance	IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3bt Higher Power over Ethernet
Environment
Operating	Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing)
Storage	Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing)