IGTP-805AT - Conversor industrial 1 puerto Gigabit Ethernet PoE+ bajo fibra óptica mediante 1 SFP
IGTP-805AT
Puertos cobre: 1 puerto 10/100/1000.
Puertos Fibra: 1 puerto 1000 SFP.
PoE: Sí Potencia máxima acumulada 30W.
Temperatura de trabajo: -40ºC - 75ºC.
Montaje carril DIN.
El conversor industrial (-40ºC a 75ºC) IGTP-805 A puede trabajar en combinación con cualquiera de los SFPs industriales (-40ºC a 75ºC) MGB-TXX bajo fibra óptica multimodo o monomodo de Planet para crear arquitecturas punto a punto y transportar tanto la información digital como la alimentación a través de la red Ethernet (PoE) bajo los estándares IEEE 802.3af e IEEE 802.3at. Requiere de fuente de alimentación externa PWR-40-24.
CARACTERÍSTICAS TÉCNICAS
Especificaciones técnicas
| Ethernet Interface | |
|---|---|
| Copper | 10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance. Auto-negotiation, auto MDI/MDI-X with PoE injector function |
| 1000BASE-X Fiber-optic Connector Type | SFP (LC) |
| Fiber Cable | Varying on SFP Module |
| Fiber Cable Distance | IGTP-802T: 220m & 550m IGTP-802TS: 10km IGTP-805AT: Varying on SFP Module |
| Fiber Optical Frequency | IGTP-802T: 850nm IGTP-802TS: 1310nm IGTP-805AT: Varying on SFP Module |
| Launch Power | Varying on SFP Module |
| Receive Sensitivity | Varying on SFP Module |
| Maximum Input Power | Varying on SFP Module |
| Power Over Ethernet | |
| PoE Standard | IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| PoE Power Output | 52V DC: 15.4 watts 52V DC: 30 watts |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Budget | 30 watts |
| Hardware Specifications | |
| Speed | Twisted-pair: 10/20Mbps for half/full duplex 100/200Mbps for half/full duplex 1000/2000Mbps for full duplex Fiber Optic: 200Mbps / 2000Mbps for full duplex |
| Flow Control | Back pressure for half duplex mode IEEE 802.3x pause frame for full duplex mode |
| Maximum Frame Size | 9K |
| LED | System: Power 1, Power 2 and Fault LED (Green) Fiber 1000BASE-X: LNK/ACT (Green) TP 10/100/1000BASE-T: LNK/ACT, 1000 (Green) PoE: Power-in-use (Orange) |
| Dimensions (W x D x H) | 135 x 87 x 32 mm |
| Weight | 500g |
| Unit Input Voltage | 12 ~ 48V DC 24V AC |
| Power Consumption | 24V: 4.3watts/14BTU, 48V: 4.8watts/16BTU (without PoE) 24V: 33watts/112BTU, 48V: 31watts/105BTU (with PoE) |
| Link Fault Passthrough DIP Switch | ON/OFF |
| Enclosure | IP30 metal case |
| Installation | DIN-rail kit and wall-mount ear |
| ESD Protection | 6KV DC |
| Alarm | Provides one relay output for power failure Alarm relay current carry ability: 1A @ DC 24V |
| Cables | 10/100/1000BASE-T: 2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters) EIA/TIA-568 100-ohm STP (maximum 100 meters) 100BASE-FX/1000BASE-SX/LX: Multi-mode: 50/125μm or 62.5/125μm optical fiber Single-mode: 9/125μm optical fiber |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Protocols and Standards Compliance | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3z Gigabit Ethernet over Fiber Optic IEEE 802.3x Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
| Environment | |
| Temperature | Operating: -40~75 degrees C Storage: -40~85 degrees C |
| Humidity | Operating: 5~90% (non-condensing) Storage: 5~90% (non-condensing) |
- Velocidad de red
- Gigabit Ethernet
Tap to zoom
