Gestionabilidad: No gestionable.
Puertos de cobre: 8 puertos 10/100.
Puertos de fibra: 2 Puertos SFP.
Alimentación PoE: Sí, PoE+ hasta 200 metros.
ERPS: No.
Temperatura de trabajo: -40°C hasta 75°C.
Montaje a carril DIN.
CARACTERÍSTICAS TÉCNICAS
Physical Port
Power over Ethernet
Industrial Case and Installation
Switching
| Hardware Specifications | |
|---|---|
| Fast Ethernet Copper Ports | Eight 10/100BASE-TX RJ45 auto-MDI/MDI-X ports (Port-1 to Port-8) |
| Gigabit Ethernet Copper Ports | Two 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (shared with Port-9 and Port-10) |
| SFP/mini-GBIC Slots | Two 1000BASE-SX/LX/BX SFP interfaces (shared with Port-9 and Port-10) |
| PoE Injector Port | Eight ports with 802.3af/802.3at PoE+ injector function (Port-1 to Port-8) |
| Switch Architecture | Store-and-Forward |
| Switch Fabric | 5.6Gbps/non-blocking |
| Switch Throughput@64 bytes | 4.1Mpps @64 bytes |
| MAC Address Table | 16K entries |
| Shared Data Buffer | 4Mb SRAM |
| Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
| Jumbo Frame | 10 Kbytes |
| DIP Switch (Port-1 to Port-8) | Standard mode: 30-watt PoE transmit distance of 100m at speed of 10/100Mbps Extend mode: 30-watt PoE transmit distance of 250m at speed of 10Mbps |
| LED | 3 x LED for System and Power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Red : Power Fault Alarm 2 x LED for PoE Copper Port (Port-1~Port-8): ■ Green: LNK/ACT (10/100Mbps) ■ Orange: PoE-In-Use 2 x LED for 10/100/1000T Copper Port (Port-9~Port-10): ■ Green: LNK/ACT ■ Orange: 1000 2 x LED for per mini-GBIC interface (Port-9~Port-10) ■ Orange: LNK/ACT ■ Green: 1000 |
| Connector | Removable 6-pin terminal block ■ Pin 1/2 for Power 1 ■ Pin 3/4 for power fault alarm ■ Pin 5/6 for Power 2 |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V AC |
| Power Requirements | 48~56V DC, 5.5A (max.) (>51V DC for PoE+ output recommended) |
| Power Consumption/ Dissipation | 6.4 watts, 21BTU (Standby without PoE function) at DC 56V power input 8.2 watts, 27BTU (Full loading without PoE function) at DC 56V power input 241 watts, 832BTU (Full loading with PoE function) at DC 56V power input |
| Dimensions (W x D x H) | 72 x 107 x 161 mm |
| Weight | 1034g |
| ESD Protection | 6KV DC |
| Enclosure | IP30 aluminum case |
| Installation | DIN-rail kit and wall-mount kit |
| Power over Ethernet | |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Output | IEEE 802.3af Standard - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 51V~56V DC (depending on the power supply), max. 30 watts |
| PoE Power Budget | Dual power input: maximum 240W (depending on power input) |
| Max. Number of Class 2 PDs | 8 |
| Max. Number of Class 3 PDs | 8 |
| Max. Number of Class 4 PDs | 8 |
| Standards Conformance | |
| Regulatory Compliance | FCC Part 15 Class A, CE |
| Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3z Gigabit SX/LX IEEE 802.3x Flow Control and Back Pressure IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
| Environment | |
| Operating Temperature | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
