IGS-501T: 5 puertos Gigabit

IGS-501T

Gestionabilidad:  No gestionable.

Puertos de cobre: 5 puertos 1000 Base-T.

Puertos de fibra: No.

Alimentación PoE: No.

ERPS: No.

Montaje a pared y a carril DIN.

Temperatura de trabajo: -40°C hasta 75°C.

CARACTERÍSTICAS TÉCNICAS

Características

Physical Port

  • 5-port 10/100/1000Base-T RJ-45 with auto MDI/MDI-X function


Layer 2 Features

  • Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T Ethernet standard
  • Supports auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
  • High performance Store and Forward architecture, broadcast storm control and runt/CRC filtering eliminate erroneous packets to optimize the network bandwidth
  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • Backplane (switching fabric): 10Gbps
  • Integrated address look-up engine, supporting 2K absolute MAC addresses
  • 1M bits on-chip buffer memory
  • 9K Jumbo packet size support
  • Automatic address learning and address aging
  • CSMA/CD Protocol


Industrial Case / Installation

  • IP30 metal case
  • DIN rail and wall-mount design
  • 12 to 48V DC, redundant power with polarity reverse protect function and connective, removable terminal block for master and slave power; 24V AC power support
  • Supports EFT protection 6000V DC for power line
  • Supports 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
Especificaciones técnicas
Hardware Specifications
Hardware Version4
Copper Ports5 x 10/100/1000Base-T RJ45 TP
auto-MDI/MDI-X, auto-negotiation
ConnectorRemovable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
LED3 x LED for system and power:
 ■ Green: DC Power 1
 ■ Green: DC Power 2
 ■ Green: Power Fault
2 x LED for each copper port
 ■ Green: 1000Mbps LNK/ACT
 ■ Orange:10/100Mbps LNK/ACT
ESD Protection6KV
EFT Protection6KV
Power Requirements12~48V DC, Redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation5.28 watts/18BTU
InstallationDIN rail kit and wall-mount ear
EnclosureIP30 metal case
Dimensions (W x D x H)32 x 87 x 135 mm
Weight456g
Switch Specifications
Switch Processing SchemeStore-and-Forward
Address Table2K entries
Buffer Memory1M bits on-chip buffer memory
Flow ControlBack pressure for half duplex
IEEE 802.3x pause frame for full duplex
Switch Fabric10Gbps
Throughput (packet per second)7.4Mpps @64bytes
Jumbo Frame9K
Network Cables10/100/1000Base-T
Cat. 3, 4, 5, 5e, 6 UTP cable [100 meters (max.)]
EIA/TIA-568 100-ohm STP [100 meters (max.)]
Standards Conformance
Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
Regulation ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Environment
TemperatureOperating: -40~75 degrees C
Storage: -40~75 degrees C
HumidityOperating: 5~90%
Storage: 5~90% (non-condensing)
Alimentación PoE
Sin PoE
Puertos RJ45
Hasta 8 Puertos
Puertos SFP
Sin Puertos de fibra
Velocidad de red
Gigabit Ethernet

Los clientes que adquirieron este producto también compraron:

Esta página web utiliza cookies propias y de terceros para que podamos mejorar tu experiencia en nuestro sitio. Más información y cómo eliminarlas.