IGT-1205AT - Conversor 1 puerto Gigabit Ethernet bajo fibra óptica mediante 2 SFPs
IGT-1205AT
Puertos cobre: 1 puerto 10/100/1000.
Puertos Fibra: 2 puertos 1000 SFP.
PoE: No.
Alimentación: DC 12-48V / 5W.
Temperatura de trabajo: -40ºC - 75ºC.
Montaje carril DIN.
El conversor industrial (-40ºC a 75ºC) IGT-1205 A puede formar parte de un anillo o estrella junto con otros equipos de comunicaciones en la red en un tendido de fibra óptica a través de dos SFPs industriales (-40ºC a 75ºC) MGB-TXX de Planet
CARACTERÍSTICAS TÉCNICAS
Especificaciones técnicas
| Hardware Specifications | |||||
|---|---|---|---|---|---|
| Copper Port | 1 x 10/100/1000Base-T RJ-45 TP Auto-MDI/MDI-X, Auto-Negotiation | ||||
| SFP / mini-GBIC Slots | 2 1000Base-SX/LX/BX SFP interfaces (Port-1 and Port-2) Compatible with 100Base-FX SFP | ||||
| DIP Switch | DIP-1: SFP Port 1 1000Base-X (default) / 100Base-FX DIP-2: SFP Port 2 1000Base-X (default)/ 100Base-FX DIP-3: Switch mode / Fiber Redundant mode | ||||
| Connector | Removable 6-pin terminal block Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 | ||||
| Alarm | Provides one relay output for power failure Alarm Relay current carry ability: 1A @ DC 24V | ||||
| LED | 3 x LED for System and Power: ■ Green: DC Power 1 ■ Green: DC Power 2 ■ Green: Power Fault 2 x LED for Per Copper Port: ■ Green: 1000 LNK/ACT ■ Orange:100 LNK/ACT 1 x LED for Per mini-GBIC interface (Port-1 and Port-2): ■ Green: LNK/ACT | ||||
| ESD Protection | 6KV DC | ||||
| EFT Protection | 6KV DC | ||||
| Enclosure | IP30 type metal case | ||||
| Installation | DIN rail kit and wall mount ear | ||||
| Dimensions (W x D x H) | 135 x 87 x 32mm | ||||
| Weight | 505g | ||||
| Power Requirements | DC 12~48V or AC 24V Redundant power with polarity reverses protection function | ||||
| Power Consumption / Dissipation | 4.8 watts/16BTU | ||||
| Cable | Twisted-Pair 10Base-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters 100Base-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters 1000Base-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters Fiber-Optic Cable 1000Base-SX: 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m 1000Base-LX: 9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers (vary on SFP module) 100Base-FX: ● 50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 2 kilometers ● 9/125μm single-mode fiber optic cable, up to 20/40/60 kilometers (vary on SFP module) | ||||
| Switch Specifications | |||||
| Switch Processing Scheme | Store-and-Forward | ||||
| Address Table | 1K entries | ||||
| Flow Control | Back pressure for half duplex IEEE 802.3x pause frame for full duplex | ||||
| Switch fabric | 6Gbps | ||||
| Throughput (packet per second) | 4.46Mpps@64bytes | ||||
| Maximum Transmit Unit | 9216 bytes | ||||
| Speed | SX/LX: 2000Mbps (full-duplex) FX: 200Mbps (full-duplex) TP: 10/20Mbps, 100/200Mbps, 2000Mbps | ||||
| Standards Conformance | |||||
| Standards Compliance | IEEE 802.3 Ethernet / 10Base-T IEEE 802.3u Fast Ethernet / 100Base-TX IEEE 802.3ab Gigabit Ethernet / 1000Base-T IEEE 802.3z Gigabit Ethernet / 1000Base-SX/LX IEEE 802.3x Full-Duplex Flow Control | ||||
| Regulation Compliance | FCC Part 15 Class A, CE | ||||
| Stability Testing | IEC60068-2-32(Free fall) IEC60068-2-27(Shock) IEC60068-2-6(Vibration) | ||||
| Environment | |||||
| Temperature |
| ||||
| Humidity |
| ||||
- Velocidad de red
- Gigabit Ethernet
Tap to zoom
